Concrete Diamond Wire Saw

Diamond Wire Saw For Reinforced Concrete

Diamond construction sintered rope saw is widely used in building demolition, subway engineering, bridge cutting, concrete bridge demolition, concrete wall brick wall demolition, all kinds of concrete column demolition and so on. CDT's self-developed rubber ensures that the saw works well in all kinds of environments.

 

* Universal wet cutting wires.
* The synthetic rubber adheres extremely well to the beads, wire and spring.This design makes protect against wear and prevents slurry from contaminating the spring and wire.
* These wires can provide very fast, smooth and low noise cutting.The smaller bead diameter also allows using as a problem-solving wire to finish a difficult cut.

*For removing large concrete, such as bridges, foundations, thick walls.

* Perfect for cutting all kinds of Concrete, Reinforced Concrete(RC), Extra reinforced concrete(ERC) and Abrasive reinforced concrete(ARC);
* Perfect balance of performance and cost;

RC:Reinforced concrete; ERC:Extra reinforced concrete; ARC:Abrasive reinforced concrete．

The principle of Diamond Wire Saw cutting is that the hydraulic motor drives the steel wire rope (diamond wire saw) with diamond beaded at high speed around the object to be cut. Under the action of a certain tension, the high-speed grinding of the object to be cut, the generated debris and heat are taken away by the cooling water, and finally achieve the purpose of separating the object to be cut.

Civil Engineering Cases

 

CDT_case 1: Large bridge cutting;
CDT_case 2: Anti-collision wall cutting;
CDT_case 3: The supporting beams and columns in the building foundation are removed;
CDT_case 4: Building support beam cutting;
CDT_case 5: Reconstruction of building structure;
CDT_case 6: Bridge support (pier) cutting.

 

* Even with thick rebar still maintain good cutting efficiency, while stable output.

 

New Product Diamond Wire Saw For Concrete

 

In order to cope with various working environments and different cutting requirements, we have developed 10.5 ultra-fine diamond wire saw for cutting applications in pure metal, highly reinforced concrete and ladle concrete. And in 2022, we will get a lot of customer feedback, and the use effect is in a leading position in China.

 

P.Code	Diameter	Bead	Fixed	Application
CDTS1	10.5	44	Rubber+Spring	Pure metal; High strength reinforced concrete
CDTS2				Pure metal, high strength reinforced concrete, High reinforcement content concrete, ladle concrete

* Perfect balance of performance and cost, Worth every customer's choice;

 

Production and Manufacturing

After ingredients, mixing, cold pressing, molding, hot pressing, selection, gluing, quality inspection process refined.