Electroplated Diamond Umbrella Cone Grinding Head

The grinding head is widely used for grinding hard and brittle materials such as ceramics, glass, granite, ceramic tiles, brick walls, jade, etc. Surface grinding, inner circle opening, and drilling need to add coolant (water). Use gently, especially at the beginning and near the end.

Umbrella Tapered Electroplated Diamond Grinding Head Glass Jade Inner Edge Trimming Chamfering Ring bracelet

1. The rotational speed shall be as high as possible than the general required linear speed and shall not be less than 10-20 meters per second;

2. Waterproof and cooling. The diamond at the head of the grinding head tool will be graphitized due to overheating, reducing the service life;

3. Check whether the tool jumps. If it does, it can not be operated directly. It can only be used after it is adjusted to no jumping;

4. Avoid shaking as much as possible during grinding, because shaking will cause local damage to the grinding tool and reduce its service life;

5. The use of light pressure and excessive force will make it difficult to discharge the debris, resulting in poor grinding effect or tool damage.

Hot Tags: electroplated diamond umbrella cone grinding head, China electroplated diamond umbrella cone grinding head manufacturers, Electroplated Diamond Carving Tools, Electroplated Diamond Umbrella Cone Grinding Head