Why diamond dotz stylus not working?

The reason why a Diamond Dotz stylus may not be working could be due to a variety of reasons. Below are some possible causes and solutions:

1. The stylus tip is damaged or worn out - Over time, the tip of the stylus can become worn out or damaged. If this is the case, the stylus will need to be replaced. To avoid this issue, it is recommended to use the stylus properly and avoid pressing too hard during the Dotz placement process.

2. The adhesive on the Dotz is weak - If the adhesive on the back of the Dotz is weak, it may not stick properly to the canvas, making it difficult to place the Dotz with the stylus. In this case, it is recommended to use a stronger adhesive or to press the Dotz down firmly with your fingers.

3. The stylus is not centered or aligned properly - If the stylus is not centered or aligned properly, it may not be able to pick up the Dotz. To fix this issue, try adjusting the position of the stylus or repositioning the canvas.

4. The canvas is too thin or flexible - If the canvas is too thin or flexible, it may move around too much while placing the Dotz, making it difficult to use the stylus. In this case, it is recommended to use a sturdier canvas or to place the canvas on a hard surface while working.

5. The stylus is not being used properly - If the stylus is not being used properly, it may not work as intended. Make sure to hold the stylus correctly and use the correct amount of pressure while placing the Dotz.

In conclusion, there are various reasons why a Diamond Dotz stylus may not be working, but by identifying the root cause and applying the appropriate solution, the issue can be resolved quickly and easily.