The key technology of diamond tool manufacturing

Nov 08, 2022

Leave a message

Because the diamond tool has the characteristics of high hardness, good wear resistance, high thermal conductivity, small friction coefficient and thermal expansion coefficient, and strong chemical inertness, as well as the very sharp edge can be obtained after careful grinding, it can be widely used in the modern manufacturing field of non-ferrous metal and non-metallic materials meticulous and relatively meticulous cutting. Mainly to understand the key technology of single crystal and polycrystalline diamond tool manufacturing.
The key technology of single crystal diamond tool manufacturing
Due to the anisotropy of single crystal diamond, the performance of different crystal faces and different directions is very different. Correct material selection and orientation can not only simplify the processing technology, reduce the manufacturing cost, but also improve the quality and service life of the cutting edge of the tool, and give full play to the excellent performance of the diamond tool.
The key technology of polycrystalline diamond tool manufacturing
The key manufacturing technology of polycrystalline diamond tool is grinding process. Because polycrystalline diamond (PCD) has the hardness and wear resistance close to that of single crystalline diamond, it is very difficult to grind the tool, which is mainly reflected in the small material grinding rate, large grinding wheel loss, low grinding efficiency and zigzag cutting edge. The technological difficulty of grinding PCD tool has become one of the obstacles to its popularization and application. In order to break through this bottleneck, scholars at home and abroad have done a lot of research and development work. The advantage is that the manufacturing cost can be much lower than that of single crystal diamond tool.

Send Inquiry