Determination Of The Quality Of Diamond Segment

① Hardness is one of the indicators reflecting the quality of the Diamond Segments. The hardness value should be within a certain range. If it is lower or higher than this range, it means that the quality of the Diamond Segment is not good. Theoretically, the hardness of the Diamond Segment must be greater than the hardness of the stone, otherwise the Diamond Segmentwill soon be worn off by the stone, or the saw blade can't cut the stone at all, so it is useless.

② Dimensions. Blade size is an important parameter index of saw blade economy index. It is of great economic significance to determine a reasonable and economical tool size for reducing production costs.

③ Weight. The thickness and weight of the Diamond Segment are different. The different weight of the same size bit can reflect the content of diamond. The high content of diamond components indicates that its sharpness will be high, and vice versa.

④ Density is the weight of the Diamond Segment/the actual volume of the Diamond Segment. In practical application, the minimum density of the Diamond Segment is used to calculate=the total weight of the Diamond Segment feeding/the standard volume of the Diamond Segment× 95%。

⑤ Determination of sharpness of Diamond Segment. Touch the Diamond Segment with your hand. If the surface of the cutter head is not rough, it indicates that the force of the Diamond Segment is poor, and vice versa