Diamond Saw Blade Tips

Diamond saw blade, as the name suggests, is made of diamond saw blade. It has the following characteristics:

1, high hardness (up to Mo's Grade 9), can withstand large cutting force.

2, good wear resistance, long life (generally in 1000-3000 hours).

3, small coefficient of thermal expansion, good heat resistance impact.

4, stable chemical properties, insoluble in acid and alkali solution, good corrosion resistance.

5. It does not deform at high temperature;

6. Low noise and small vibration when cutting. Common saw blades on the market are circular steel tooth saw blade and flat steel tooth saw blade two categories:
Round steel sawtooth shape has the advantage of high processing efficiency, but the chip is easy to plug the chip slot or collapse into powder; The advantage of flat steel sawtooth shape is that it is not easy to cut the seam or crack into fragments when the cutting depth is not big. Compared with square tooth type, round tooth type has advantages and disadvantages:
The advantages of square teeth are strong impact resistance, low noise, long service life; The disadvantage is high cost and low processing efficiency. At present, the output of diamond tools with circular and flat teeth in our country has accounted for more than 90% of the total. The following points should be noted in use:

1, installation must make the serrated cutting edge and the working surface vertical and maintain a certain inclination, so as to improve cutting efficiency and extend its life.

2, when using, do not point the tip of the knife at the human eye or other equipment to avoid accidents.

3, when the workpiece is thick, the method of low speed feed should be used to test cutting to determine the cutting speed before normal operation

4, in the process of use if there is any abnormal situation should be stopped immediately for inspection.

5. Lubricating oil is often added to the guide surface and lead screw of the machine tool to ensure the normal operation and use effect of the machine.