Description of abrasives and particle size for diamond tools

Nov 03, 2022

Leave a message

Diamond tool is a hard grinding wheel, which is made of diamond abrasives as raw materials and uses metal powder, tree powder, ceramic and electroplated metal as bonding agents respectively. It is a circular consolidation grinding tool with a through hole in the center. Next, diamond tool Xiaobian to introduce the abrasives and particle size of diamond tools.
1. Abrasive
Abrasive is an important index of grinding wheel, diamond tool grinding processing things is to rely on it, without it is equal to no diamond tool this product. The selection of abrasive requirements are relatively strict, diamond tools and workpiece friction temperature is high, abrasive can not stand so high temperature, will soon melt away, so high temperature resistance is it must; Grinding products are a lot of metal, some are very hard, and abrasive hardness is not high, anti-grinding, grinding wheel hardness requirements are relatively high; The grinding time between the diamond tool and the workpiece is not completed instantaneously, which requires a certain amount of time, so that it has a strong toughness.
2. Granularity
The size of abrasive particles is called particle size. Particle size is divided into coarse-grained and fine-grained, particle size classification is generally used by screening method, for example, particles can pass through 60 holes of the screen called small particles, that is, fine grained, can pass through 40 holes of the screen, called large particles, is coarse-grained. Sometimes they're medium, and sometimes they're called fine. The grain size of grinding wheel has a significant impact on the surface finish and processing efficiency of grinding workpiece. If the grinding grain is coarse and the grinding amount is large, the grinding efficiency is very high, but the workpiece surface is rough and not so smooth; Fine grinding, grinding is more uniform, the surface of the workpiece is smooth, but the cutting amount is not so large, thus grinding efficiency is relatively low.

Send Inquiry