Operating diamond grinding wheel should pay attention to several details

Nov 22, 2022

Leave a message

Diamond grinding wheel is a valuable tool, only used for processing high hardness materials, and should not be used for grinding general steel or other soft materials. In the process of operating and using diamond grinding wheel, we must pay more attention to it. Usually, people often appear the following problems in the process of operating diamond grinding wheel. Therefore, Xiaobian summarizes the following for you, hoping to help more people understand what matters to pay attention to in the process of operating diamond grinding wheel.
1. Side grinding:
In order to give full play to the role of diamond, it is necessary to increase the holding force of the binder on diamond and improve the binding strength of the grinding wheel. Single-layer high-temperature brazed superhard abrasive grinding wheel can overcome the shortcomings of electroplated grinding wheel, and realize the chemical and metallurgical bonding of diamond, binder and metal matrix, with high bonding strength. Only maintaining the thickness of the bonding layer at 20% ~ 30% of the height of abrasive grains can firmly hold abrasive grains in high-load, high-speed and efficient grinding. The exposed height of abrasive particles of brazed grinding wheel can reach 70% ~ 80%, thus increasing the chip space, the grinding wheel is not easy to clog, and the utilization of abrasive materials is more full.
2. Front operation:
In daily use, many operators are always used to operating on the grinding wheel. Sintered metal bonded grinding wheel mainly uses bronze and other metals as the bonding agent and is manufactured by high temperature sintering method. It has high bonding strength, good formability, high temperature resistance, good thermal conductivity and wear resistance, long service life and can withstand large load.

Send Inquiry