Correct operating rules for diamond grinding wheels
Nov 21, 2022
Leave a message
Diamond grinding wheel is very sharp, with people in use, all kinds of events have been exposed, so we should let more people know how to use it, to reduce the occurrence of accidents. To reduce the misery. So people who use it a lot need to pay attention to the correct operation procedures.
1. After the diamond grinding wheel is mounted on the flange, it can be used only after static balance. Care should be taken not to remove it from the flange until the grinding wheel is used up.
2, the use of diamond grinding wheel machine tool, its rigidity is better, the spindle selection accuracy should be high (radial runout is not more than 0.01mm), and can make trace transverse feed.
3. Coolant should be used as far as possible during grinding, which can not only improve grinding efficiency and grinding quality, but also reduce grinding wheel wear. Commonly used coolant kerosene, light diesel, light oil lamp, kerosene is generally better.
4. The operator should wear protective glasses and stand on the side or inclined surface of the grinding wheel instead of directly opposite it.
5. Do not wrap the workpiece with cotton yarn or wear gloves for grinding, so as to avoid the accident caused by the involvement of gloves or cotton yarn in the diamond wheel.
6, for small, large and hard to take the workpiece, can not be grinding on the grinder. In particular, small workpiece should be held firmly to prevent squeezing into the diamond grinding wheel and crushing the grinder.
7. During grinding, the tool or workpiece should be prevented from severe impact or excessive pressure on the grinding wheel.
8, when processing the workpiece, sometimes the shape will be different, we have to replace the corresponding grinding wheel for processing, so as not to produce unnecessary danger.
Send Inquiry
