Why do the grinding discs used for grinding the floor consume quickly?
Feb 19, 2023
Leave a message
In the construction of wear-resistant floors, we often encounter some problems of this kind. For example, why are the grinding discs consumed so quickly during the construction of wear-resistant floors? How can we save grinding discs? Today, I will share with you some tips for selecting grinding discs when grinding wear-resistant floors.
Firstly, I will briefly popularize the knowledge of grinding discs. The grinding discs are divided into hard base, medium base and soft base. Hard base grinding discs are used for poor-density ground, and soft base grinding discs are used for better ground quality. Medium base grinding discs are used for general ground. Grinding is fine.
In the early stage of wear-resistant floor construction, the quality of most concrete floors is not very good, especially for the renovation of some old floors, the flatness is not good, the ground is loose, and the hardness is very poor. Very fast.
For poor-quality ground, it is recommended to use a medium or large-scale floor grinder. After sprinkling water and drying in the shade, use dry grinding. First, use 30# hard-base metal grinding discs to grind to remove the loose surface layer for leveling treatment, and then use 100# medium-hard base or Grinding treatment of soft-base metal discs, the flatness and basic hardness are handled well, and the latter is much simpler.
If the base density of the ground is poor, the sand grains and the diamonds of the grinding disc will wear each other, and the consumption of the grinding disc will be accelerated. At this time, we can first harden the ground to increase the density of the ground before grinding.
When using grinding discs, you must not skip the number, otherwise others will laugh at you. According to normal use, dry grinding saves more consumables than water grinding, but water grinding will make the ground more even and delicate.
The correct construction method is an important guarantee for high-quality floors. Choosing the appropriate grinding disc according to the actual situation of the ground can not only reduce the consumption of grinding discs for everyone, but also reduce the construction cost.
Send Inquiry
